Safeguard your site from surges with Eaton

Safeguard your site from surges with Eaton

DID YOU KNOW? If a surge has enough energy it can damage or destroy electrical equipment or even the electrical infrastructure itself, so  installing the right level of protection at the right locations is vital for the safeguarding of a site.

SOLUTION: Eaton surge protectors will deliver as high a level of  protection as you need at a fraction of the cost of replacing the equipment each unit os designed to protect. From a new install or maintenance perspective, it is the best investment you can make to keep plant and electrical facilities operating continuously and to avoid the high direct and indirect costs of surge and transient induced failures. 


EATON SURGE PROTECTION SOLUTIONS

 

The SPD3200-TN-E is designed to protect three phase power systems against damage from surges and spikes caused by lightning and other electrical sources. The unit is intended for point of entry or main board protection with an M.E.N. connection and is connected in parallel with the power system via its own integrated safety disconnect MCB.

 
 

The CSFI is designed for mounting in distribution boards to provide secondary protection against power surges caused by external sources such as lightning strikes & substation switching as well as providing a measure of protection from surge events generated on the secondary side of the filter.

 

The DSFI is designed to provide secondary protection against power surges caused by lightening strike & substation switching as well as providing a measure of protection from surge events generated on the secondary side of the filter

 
Eaton-SPD3200.png

The SPDI surge diverters provide the ultimate solution for surge protection in single & multi-phase systems. The SPDI surge diverters provide protection against the damaging effects od lightning, utility switching, switching electric motors and more. SDI surge diverters can be installed as point-of-entry or sub-board protection and are connected in parallel with the power circuit via separate protection HRC fuses.

 

YHI supplies a range of Eaton surge protection equipment for all low voltage installations in New Zealand and can help electricians and engineers select the right units to protect every application.

Talk to your local YHI sales representative today, or freephone 0800 UPS 359 (0800 877 359) for more information.

NEW: 93PR and 93PS UPS from Eaton

NEW: 93PR and 93PS UPS from Eaton

Lower the cost of ownership with C&D Technologies

Lower the cost of ownership with C&D Technologies